Beijing Shengtianjiayuan Technology Inc.
Main products:On-Line Orp Controller
Products
Contact Us
  • Contact Person : Mr. Dan Andrew
  • Company Name : Beijing Shengtianjiayuan Technology Inc.
  • Tel : 0086-10-82416475
  • Fax : 0086-10-58948658
  • Address : ,,MBJ2638,RM1007,10/F., HO KING COMM. CTR., NO. 2-16 FA YUAN STREET, MONGKOK, HONG KONG
  • Country/Region : China

In situ sterilizable Fermentor & Bioreactor SDL 10L~50L

In situ sterilizable Fermentor & Bioreactor SDL 10L~50L
Product Detailed
The SiDoLim in situ sterilizable fermentor (10L~50L) system is a lab scale fermentor and designed for ease of use.

Fermentor SDL 10L~50L    

Silver Double Limited manufactures various equipment related to bio-process for biotechnology, biochemical, pharmaceutical, agricultural, environment, life science industry. Especially, SiDoLim's high performance of bioreactor system is applicable for both research and industrial bio-processing facilities. 

The SiDoLim in situ sterilizable fermentor (10L~50L) system is a lab scale fermentor and designed for ease of use. The thermal heater is installed in the jacket of the fermentor vessel and not only the heater controls the temperature in the vessel but also it raises the temperature up to the sterilization temperature that it does not need the additional autoclave system. As this system is designed in the spirit of plant system that the result from this system can be directly applied to the mass production scheme. This system can be used to develop new products in the laboratory of the university or venture company. The result of the wonderful product can be applied in the SiDoLim pilot scale system directly which is manufactured by Silver Double Limited.

As this system uses the same integrated control board at the pilot and plant scale fermentor system.

Easy to operate, wash and make maintenance as it has the open frame structureThe temperature of the vessel is measured by the RTD (Pt-100) and controlled by the digital PID control algorithm.

Vessel

The water jacket system is adopted for precise temperature control. The sight glass makes to monitor the status of the media. The spare ports are installed on the head plate that the auxiliary sensors can be installed.  

Specification

Agitation

Drive

DC motor, AC Gear motor

Top drive (mechanical seal driving)

Range

50~1000 rpm 1 rpm

Impellers

Turbine impeller(SUS316L) Foam breaker (SUS316L)

Sensor

Magnetic Hall sensor

Control

Microprocessor based PID Control

Materials & Finish

Vessel

Using 316L stainless steel it is polished mechanically and electrically

Piping

316L stainless steel prevent contamination and is polished

O-rings/Gaskets

Silicon material is used for the O-ring and the EPDM is used for gasket

Sterilization

Built-in heater makers the in-situ sterilizing for the vessel, head plate, filter, aeration pipe lines and etc. in 105 ~130 temperature range automatically

Temperature

Range( )

From 3°C above the cooling water temperature to 80°C(accuracy 0.1°C)

Sensor

RTD (Pt-100)

Control

The built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket

Aeration

Sparger

Ring sparger (SUS 316L)

Intel Filter

The cartridge type sterilizable pleated type 0.2μm absolute filter specifications(option item)

Out Filter

The same as internal filter specification(option item)

Control Range

Different vessel size and/or ordered specifications

Pressure Control

The back pressure is controlled manually and/or automatically

Control Unit

Panel

8.5" Graphic Color LCD, Membrane keypad

Communications

Memory stick, printer, computer with the RS-232C communications protocol.

Controller Board

Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system

Power Supply

220V 50/60Hz, Single phase

Data Storage

pH, DO, Pressure, Temperature and Agitation speed

Vessel Dimension

 

Catalog Number

Total Vol.

(working Vol.)

Inner Dia.(mm)

Inner Heighta(mm)

Impeller Diameter(mm)

D/P(%)

H:D

D

H

P

SD010

10L (7L)

190

365

80

42

2 :1

SD015

15L (10L)

215

430

90

42

2 :1

SD020

20L (14L)

235

470

95

40

2 :1

SD030

30L (20L)

260

555

105

40

2 :1

SD040

40L (30L)

295

590

120

40

2 :1

SD050

50L(40L)

335

635

135

40

2 :1

In situ sterilizable Fermentor & Bioreactor SDL 10L~50L



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.