Beijing Shengtianjiayuan Technology Inc.
Main products:On-Line Orp Controller
Products
Contact Us
  • Contact Person : Mr. Dan Andrew
  • Company Name : Beijing Shengtianjiayuan Technology Inc.
  • Tel : 0086-10-82416475
  • Fax : 0086-10-58948658
  • Address : ,,MBJ2638,RM1007,10/F., HO KING COMM. CTR., NO. 2-16 FA YUAN STREET, MONGKOK, HONG KONG
  • Country/Region : China

In situ sterilizable Fermentor & Bioreactor SDS 100L~300L

In situ sterilizable Fermentor & Bioreactor SDS 100L~300L
Product Detailed
The SiDoLim in situ sterilizable fermentor (SDS 100L~300L) system is a lab scale fermentor and designed for ease of use.

Fermentor SDS 100L~300L 

This system can be used for microbial, insect and mammalian cell culturing procedures. The stainless steel vessel and the whole attachments can be sterilized automatically or manually in the pilot scale fermentation system and the whole fermentation procedures can be also performed automatically. The integrated control board measures the whole sensor values and control the fermentor system based on the measured values. The procedures and monitored data are graphically displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode. 

Controller System

Very easy to connect with the various systems such as memory stick, printer, computer with the RS-232C communication protocol.

Head Lifting System  

Lifting speed can be adjusted by the modulation of the speed control valve.

Specification

Agitation

Drive

DC motor, AC Gear motor Top drive motor (mechanical drive)

Range

50~550 rpm 1 rpm

Sensor

Magnetic Hall sensor

Impellers

Turbine impeller(SUS 316L) Foam breaker(SUS 316L)

Control

Microprocessor based PID

Temperature

Range( )

From 3 above the cooling water temperature to 80 (accuracy 0.1 )

Control

The temperature is automatically controlled by the built-in heater cartridge.

Sensor

RTD(Pt-100)

Aeration

Sparger

Ring sparger (SUS 316L)

Inlet Filter

The cartridge type sterilizable pleated type 0.2μm    absolute filter is applied.

Outer Filter

The same as inlet filter specification.(optional item)

Control Range

Different vessel size and/or ordered specifications.

Materials & Finish

Vessel

Using 316L stainless steel it is polished mechanically and/or electrically.

Piping

316L stainless steel prevents contamination and is polished by electrically.

O-rings / Gaskets

Viton or silicone material is used for the O-ring and the EPDM is used for the gasket.

Control Unit

Panel

8.5" Graphic Color LCD, Membrane keypad

Communications

Memory stick, printer, computer with the RS-232C communication protocol

Controller Board

Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system

Pressure control

The pressure is controlled manually and/or automatically

Power Supply

220V 50/60Hz single phase, 380V 50/60Hz three phase

Data Storage

pH, DO, Pressure, Temperature and Agitation speed

Heating Plate

The head lift system is powered by air cylinder and guided by two sets of linear motion guide. The lifting load capacity can be adjusted and designed for the size of the head plate.

 

Fermentor Vessel Dimension

Order Number

Total Vol.

(Working Vol.)

Inner Dia.

(mm)

Inner Height

(mm)

Impeller Dia.

(mm)

D/P

(%)

H: D

D

H

P

PD100

100L (70L)

385

900

155

40

2.3 :1

PD200

200L (150L)

500

1055

200

40

2.1 :1

PD300

300L (210L)

550

1255

220

40

2.3 :1

PD500

500L (350L)

680

1400

280

40

2 :1

PD700

700L (500L)

750

1600

300

40

2 :1

In situ sterilizable Fermentor & Bioreactor SDS 100L~300L



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.